Adjusting the automatic closure
Learn in this tutorial how to manage delayed automatic closure |
This tutorial is applicable to:
Avidsen Sliding 250Kg 114459-114462- 114463- 114305-114306- 510063,Avidsen Slides 500Kg 114457-114460-114461- 114464-114465- 510064
Avidsen Sliding 250Kg 114459-114462- 114463- 114305-114306- 510063,Avidsen Slides 500Kg 114457-114460-114461- 114464-114465- 510064
Difficulty: Easy
Time needed: 1 minute
Number of steps: 5
Updated: October 2025
Beware!
In order for the automatic closure MODE to be used, it is imperative to have plugged photocells into the electronic board.
Step 1: Get into the card settings
Press the "ProG" key on the card for 3 seconds (L1 lights up).
Step 2: Select the operating MODE submenu
Press "+" 3 times (L4 lights up).
Step 3 Go to the operating MODE submenu
Press "SET" once (by default, L1 is on).
Step 4: Choose Automatic Closure Mode
Press "+" once (L1 and L2 light up).
Step 5: Validate the programming
Press "SET" once (all lights come on and then off).
Beware!
If L1 stays on after animating the red lights, then activating the automatic closure failed.
Check the correct connection of the photocells.
Info
By default, the waiting time for the card before automatically starting closing is 30s.
If you want to change the wait time, refer to the tutorial "Setting Time" tutorial.
Related Articles
114252 - Telecommand programming
Please find below a tutorial to help with programming your universal remote control on your portal automation Difficulty: Easy Time required: 10 minutes Number of steps: 5 Updated: October 2024 Programming your remote control will be done in 2 steps. ...104717 - Universal Remote Control Programming
Please find below a tutorial to help with programming your universal remote control on your portal automation Difficulty: Easy Time required: 10 minutes Number of steps: 5 Updated: June 2026 Programming your remote control will be done in 2 steps. ...