Wifi camera connection Rheita 100 - Sound signal method

We will detail in this tutorial how to upload a Rheita 100 camera by the sound signal method.For reasons of simplicity, it is advisable to perform the procedure near your internet box.Note that in case of changing internet box, it will be necessary to make the association procedure since step 1 after deleting the camera from the application.Make sure you have the QR code of the camera. In case of loss of this QR code, your camera will be unusable.

Difficulty: Easy

Time required: 5 minutes

Number of steps: 4

Updated: September 2024

Step 1: Check the connection status of the camera

Before any connection, please check that the camera is powered by a 230V power supply. If you installed the camera instead of old lighting, make sure that the control switch that controls it is activated.

Switch the optical globe of your camera upwards.
Then remove the cache from the compartment from your camera using a cruciform screwdriver.

Press the "Reset" button on your camera for 3 seconds until you hear a beep
Wait about 1 minute for your camera to reset.
During its reset phase, the camera optical globe will perform a horizontal right and left movement and emit a start melody (two series of five notes).

Step 2: Wifi Association

Download the applicationAt Home securityfrom the googlePlay store or appStore of your smartphone.
Make sure your smartphone is connected to the 2.4Ghz Wi-Fi network of your internet box (not compatible 5Ghz Wifi network).

Launch the application and click on "+"

Scan the QR code on the camera
In case of difficulty scanning the QR code, remember to move away from the camera.
ATTENTION not to lose the QR code. In case of loss of the latter, your camera would be unusable.

The indication "Ongoing Request" will appear. Please wait a few seconds.

The application will ask you if the camera has been properly reset.
If you performed step 1 correctly, please press "Successful Reset"
If you jump step 1, please do it imperatively and make sure that the camera has emitted its boot melody (two series of five notes) and then press "Successful Reset".

Check the presence of a network name (SSID) to the right of the symbol

If the network name does not appear, go to your smartphone permissions and check that the "Position" or "Location Information" authorization is granted.

Enter the WIFI key of your Internet box.
Be careful, the Wifi key should not be longer than 18 characters. The Wi-Fi key must contain only letters and numbers.
Please follow step 3 before clicking on next

Step 2.1: Where to find the Wifi operator Wifi key

LiveBox 4 = The wifi key is visible by clicking on the facade i of your Livebox.
LiveBox 5 = The wifi key is located on the identification card and also on the label at the outset of your Livebox.
LiveBox 6 = The wifi key is visible in the Wi-Fi settings accessible from the front screen.

Step 2.2: Where to find the SFR Wifi operator key

SFR NB6/NB7/NB8 = The wifi key is located on the label on the back of your SFRBox.

Step 2.3: Where to find the Bouygues Wifi operator key

Bbox Miami/ 4K = The wifi key is located on the label on the back of your Bbox. This is the code entered on the WPA line.

Step 2.4: Where to find the Wifi operator Freebox

Valid for Freebox Delta/Pop/Revolution/mini/One/4G+/Crystal

Please download the Freebox Connect app available on the AppStore and Google Playstore.
Select the template for your Freebox and identify yourself.
The wifi key of your Freebox is located in the menu "My WIFI access"

Step 3: Connecting the camera

Position your smartphone a few centimeters from the camera and mount your smartphone to the maximum.

Then press "Next"

Your smartphone will emit a strident ringtone that your camera microphone should hear.
Do not click on "Continue"
Please wait so by being close to the camera until the camera emits a connection melody.