Replacement of the rear fork

Replacement of the rear fork

Remplacement de la fourche arrière

Your jack has suffered a significant impact and its fixing fork on the pillar is broken. Follow the step-by-step steps of this tutorial to replace it.ASTUCE: If you want to use a screwdriver; to access the BTR screws at the fork without having to present the crossing BTR head and risk damaging the hollow of the screw, together two endpiece extensions.


Difficulty: Easy
Time required: 5 minutes
Number of steps: 4
Updated: October 2025
Equipment required:
a key BTR, a screwdriver
Detached part(s):
Reference: 581126BRear fork
Etape 1 Enlever la fourche arrière

Step 1: Remove the rear fork

Remove the 4 protective rubbers from screws

Etape 2 Dévissez et enlevez les 4 vis BTR

Step 2: Unscrew and remove the 4 BTR screws

Unscrew and remove the 4 BTR screws

Etape 3 retirer la fourche arrière

Step 3: Remove the rear fork

Cut the back fork and remove it completely by doing it
passing through the cable

Etape 4 Remettre la fourche arrière

Step 4: Putting back the back fork

Iron the engine fork by cable. Turn it back on the
engine casing and put back rubber protections;
Council:
Hold the seal well on the fork to prevent it from leaving during the
movement thereof on the cable.
When setting up the fork, pay attention to what
the cable pass is well under the fork.