Adjusting the automatic closure
Find out in this tutorial how to manage timed automatic closure |
Difficulty: Easy
Time required: 1 minutes
Number of steps: 5
Updated: October 2025
Attention!
In order for the automatic MODE to be used, it is imperative to have plugged photocells to the electronic card.
Step 1: Enter the card settings
Press the "PROG" button on the card for 3 seconds (L1 turns on).
Step 2: Select the operating MODE sub menu
Press "+" 3 times (L4 turns on).
Step 3 Enter the MODE Operating MODE sub menu
Press "SET" once (default, L1 is on).
Step 4: Choose Automatic Closure Mode
Press "+" once (L1 and L2 turn on).
Step 5: Valid programming
Press "SET" once (all lights turn on and then turn off).
Attention!
If L1 remains on after animating the red lights, then activation of the automatic closing failed.
Check the correct connection of the photocells.
Info
By default, the card waiting time before automatically starting closing is 30s.
If you want to change the waiting time, refer to the "Time Time Setting" tutorial.