Locate both screws under the keyboard.

Unscrew both screws.

Insert a screwdriver into the hole under the keyboard and make a lever upwards.

Separate the keyboard from its fastening.

Recover both elements.

Locate the locations of the fixing holes.

Drill the wall and screw the support.

Make connections of the power supply and the device to be controlled from the keyboard.

Present the face of the keyboard towards the middle and push it up to the maximum.

There should be only a small space between the face and the upper visor.

Push the bottom of the keyboard facade towards the stand.

Turn both screws under the keyboard to finalize the installation.

Be careful that there is no space between the keyboard facade and the upper visor.

Do not start restoring the keyboard by positioning the facade directly at the top of the stand.