Adding an EXTEL Open 3K monitor
Below you will find the procedure to add a secondary monitor to your installation |
Difficulty: Easy
Time required: 10 minutes
Number of steps: 2
Updated: June 2025
Step 1: Connecting
- Make sure the door station is connected to the BUS A and BUS BUS B terminals of the 1st monitor
- Make sure that the BUS A and BUS BUS B terminals of the second monitor are connected to the terminals ADD A and ADD B of the main monitor.
- Monitors are configured by default as a main monitor.
Step 2: Configuring the monitor in secondary
- Connect the AC adapter or turn your associated circuit breakerfor both monitors.
- Wait for the monitors to have started correctly.
Note that it is not necessary to make a Wi-Fi connection on the second monitor
On the secondary monitor
- Go to the "Regulations"
- Press "Other settings"
- Press "Additional"
- Your secondary monitor will restart on its own.
The second monitor is now properly configured
- In case of non-operated, perform an electrical restart of the two monitors