• First make sure the intercom works properly. Press the call button must ring your inner monitor.
• You can only have one access code to control the gate or electric trigger.

• If in doubt or programming error, it is advisable to reset the keyboard administrator code.
• Wake up the monitor by first clicking on
• Enter the monitor setting menu by clicking a second time on

• Navigate the menu by pressing four timesfor the setting icon to be lit in orange
• Then click onto enter the setting menu.

• This menu is composed of two parts
• Press five timesfor adjusting the keyboard a code to be switched on in orange.
• Then click onto reset the administrator code. Street turntable will issue 1 confirmation beep
• The new administrator code will be 11111111

By default, the access code is 000. In our example, we modify it to use 678

If you want to change it on the door station

• Type11111111then*(The door station emits a long beep. The bell and the door name flash 3 times and then turns off)
• Type51then*(The door station emits a short beep and the name door lights fixed)
• Type678then*(The door station emits two short beeps and the name door flashes 3 times)
• Type 3 times on#for leaving the menu.

The new code to unlock dry contact for the portal will be1then678then#

The new code to power the electrical trigger will be2then678then#

This step is not mandatory.

By default the administrator code is 11111111. In our example, we modify it by 12345678

• Type11111111then*(The door station emits a long beep. The bell and the door name flash 3 times and then turns off)
• Type50then*(The door station emits a short beep and the bell lights fixed)
• Type12345678then*(The door station emits two short beeps and the bell flashes 3 times)
• Type 3 times on#for leaving the menu

The new administrator code will be12345678