Programming a badge will require the monitor to be connected to the internet and be associated with your smartphone.

• Check that the Wifi icon is fulland is not barred.
• In case of error crossed icone, please review the connection by following the tutorial "Simplified Wifi Association Philips WelcomeEye Connect 3"

• Launch the Philips Door Connect app on your smartphone and place yourself in front of your door station.

• Press your intercom to connect to the door station.

• Pressin order to enter the settings of the monitor.

• Select "Badge Management".

• Press "Add a badge".
• Name your badge and then press "Next".

• Pass your access badge on the right part of your door station.
• The door station will emit 3 beep confirming its recording.

• The application will confirm by this message the right programming.

• A short passage in front of the street plate badge reader will power the electric trigger. The door station will emit 1 Bip.
• A passage maintained for 2 seconds in front of the badge reader will trigger a dry contact to control a portal automation. The door station will emit 2 Bips.

• In case of loss of a badge or if you want to disable one, you can delete it from the management of the application.
• Select your badge.
• Press "Delete".
• Validate the deletion.