Adding a Welcome Eye Connect 3 monitor
Below you will find the procedure to add a secondary monitor to your installation |
Difficulty: Easy
Time required: 10 minutes
Number of steps: 2
Updated: October 2024
Step 1: Connecting
- Make sure the door station is plugged into the BUS A and BUS BUS B terminals of the 1st monitor
- Make sure the second monitor is plugged into ADD A and ADD B of the main monitor.
- Monitors are configured by default as a main monitor.
- Position the monitors on their media
Step 2: Configuration of the monitor in secondary
- Connect the AC adapter or turn your associated circuit breakerfor both monitors.
- Wait for the monitors to have started correctly.
On the secondary monitor,
- Go to the "Regulations"
- Press "Add Device"
- Press Monitor
- Select "Additional 1" in "Family 1"
- Then click on the return arrow.
- The monitor will restart.
On the main monitor,
- Make sure the main monitor is configured as "Main"
Step 3: Electrical restart
- Once the secondary monitor is restarted, it is necessary to make an electric restartof all monitors.
- Remove power from all monitors and wait 10 seconds.
- Replug the power of all monitors.
- Wait for their start.
- The second monitor is now properly configured