• Make sure the first door station is plugged into the BUS A and BUS BUS B terminals of the monitor
• Make sure the second door station is plugged into the ADD A and ADD B of the monitor holder
• Street turntables are configured by default as main door station.

• Position the monitor on its support

It is advisable to be 2 people in order to do the procedure because immediately after tensioning the appliance, it will have to be located in front of the door station.

• Connect the AC adapter or turn your associated circuit breaker.
• If your device is already powered on, please remove its power supply and reconnect it.

• ImmediatelyAfter turning on the monitor, press the bottom button () door station andPress and hold it for 30 seconds until you hear a beepon the door station
• Street turntable is now configured as a secondary door station.
• Make sure that when pressing the secondary door station, the DOOR2 indication is present on the monitor.

• In case of error or if you want to reconfigure your door station in the main one, it will be necessary to follow almost the same procedure.

It is advisable to be 2 people in order to do the procedure because immediately after tensioning the appliance, it will have to be located in front of the door station.

• Connect the AC adapter or turn your associated circuit breaker.
• If your device is already powered on, please remove its power supply and reconnect it.

• Immediatelyafter turning on the monitor, press the top button (backlit door) of the door station andPress and hold it for 30 seconds until you hear a beepon the door station
• Street turntable is now configured as main door station
• Make sure that when pressing the secondary door station, the DOOR1 indication is present on the monitor.