Replacement of the Philips WelcomeEye Street Platinum main electronic card
The door station of your intercom no longer wants to work, no longer wants to ring? It will be necessary to replace the motherboard of your door station.Before any intervention or maintenance, please turn off each element of your video doorman and place yourself on a suitable surface so as not to scratch the lens |
Difficulty: Easy Time required: 20 minutes Number of steps: 8 Updated: May 2023 | Equipment required: Cruciform screwdriver, plastic spatula, precision clamp Detached part(s): Reference: 531006MPhilips Street Platinum motherboard WelcomeEye |
Step 1: Remove the rear support
- Return the Platinum de rue
- Remove the 4 rear screws from the door station using the cruciform screwdriver.
- Be careful, these 4 screws can be located under a protective rubber.
- Gently remove the black rear facade.
Step 2: Disconnect the microphone
- Gently disconnect the microphone connector by pulling it towards you using a precision clamp. Be careful, do not shoot the threads.
Step 3: How to remove a connector
- To safely remove the connector, hold it using the precision clamp and perform lightweight right and left movement.
Step 4: Disconnect electronic video card
- Gently disconnect the connector from the electronic video card by pulling it towards you using a precision clamp. Be careful, do not shoot the threads.
Step 5: Disconnect RFID drive
- Gently disconnect the RFID drive connector by pulling it towards you using a precision clamp. Be careful, do not shoot the threads.
Step 6: Disconnect the Speaker
- Gently disconnect on the speaker connector by pulling it towards you using a precision clamp. Be careful, do not shoot the threads.
Step 7: Recognizing the elements
- Remove the electronic card from its location using the precision clamp.
- Replace the electronic card. Be careful to respect the passage of cables so as not to pinch them.
- Recognize the elements by following steps 2 to 6.
Step 8: Replacement of the rear support
- Reposition the rear support of the door station by revising the 4 screws previously removed in step 1.
- The replacement is complete.