Lens Replacement for Philips WelcomeEye Street Platinum
The lens of your door station is damaged or scratched? It will be necessary to replace it.Before any intervention or maintenance, please turn off each element of your video doorman and place yourself on a suitable surface so as not to scratch the lens |
Difficulty: Easy Time required: 10 minutes Number of steps: 5 Updated: May 2023 | Equipment required: Key Antivol Door station, Cruciform Tournevis Detached part(s): Reference: 531006BProtective lens for Philips Street Platinum |
Step 1: Remove the aluminum front facade
- Unscrew the anti-theft screw on the bottom of the door station thanks to the Antivol key
- Remove the front aluminum front facade
Step 2: Remove the black front facade
- Return the aluminum front facade to have access to its interior
- Unscrew the 4 holding screws of the black front facade using the screwdriver
- Be careful not to lose screws
- Return the aluminum front facade to have access to its exterior
- Remove the black front facade from door station
Step 3: Replacement of the lens
- Remove the old lens
- Reposition the lens seal in its location
- Reposition the new lens
Step 4: Setting up the black front facade
- Make sure the horizontal seal is well positioned in its housing
- Make sure the call button backlight diffuser is properly positioned in its housing
- Reposition the black front facade of the door station
Step 5: Setting the front facade.
- Turn the aluminum front facade to have access to its interior while keeping the front black
- Turn the 4 screws of the black front facade
- Make sure there is no day between the black front facade and the aluminum facade
- Put the front facade back on the door station
- Turn the anti-theft screw
- Replacement is complete