Philips WelcomeEye Monitor Speaker Replacement
You no longer hear visitors or the ringtone no longer works? The Speaker of your monitor needs to be replaced.Before any intervention or maintenance, please turn off each element of your video doorman and place yourself on a suitable surface so as not to scratch the screen |
Difficulty: Easy Time required: 20 minutes Number of steps: 3 Updated: April 2023 | Equipment required: Cruciform screwdriver, plastic spatula, precision clamp, B-7000 glue tube Detached part(s): Reference: 538038QWelcomeEye Monitor Speaker |
Step 1: Remove rear support from the monitor
- Return the monitor.
- Remove the 4 rear screws from the monitor using the cruciform screwdriver.
- Insert the plastic spatula on the lower part of the screen and slightly lever.
- Remove the rear facade from the monitor.
Step 2: Remove the Speaker
- The speaker is located at the bottom right of the monitor and is glued to the chassis.
- Remove the connector from the Speaker using the precision clamp by pulling slightly on the connector
- Lightly décolle the black holding strip.
- Slide the plastic spatula on the lower part of the Speaker and lever slightly to take off
- Remove the Speaker
Step 3: Replacement of the Speaker
- Using the B-7000 glue, place a strip of glue around the Speaker support. Be careful not to put too much.
- Then paste the new Speaker instead of the failure.