• The inverter has operating lights indicating its operating state.
• The latter is located at the end of the 230V cable and must be installed under one of the solar panels

• Unscrew both screws from the inverter support to extract it.
• Be careful not to drop the inverter.
• Depending on the outside sunshine, the inverter can be very hot.
• Handle the inverter carefully, the latter is connected to the 230V.

• The inverter has only one light. It can be green, yellow or red color. It can be fixed or flashing.

Seeant extinguished

• The inverter is not powered by solar panels.
• It is normal for this light to be extinguished at night, at dawn or dusk

Solution: Make sure all solar panels are connected to each other and that each plug is pressed well.

Fixed red light

• The inverter is powered by solar panels but is not connected to a 230V socket

Solution: Make sure the inverter is plugged into a 230V socket and there is plenty of current in the socket.

Bright red light

• The inverter encounters an anomaly.
• Disconnect 230V socket and solar panel in order
• Wait 2 minutes
• Replacing solar panels
• The red light should be fixed. Otherwise, please contact technical support.

Flashing yellow light

• The inverter is powered by solar panels, is connected to a 230V socket but is not connected to Wi-Fi.
• The solar kit produces current in this configuration.

Solution: Just connect your solar kit in wifi to your internet box by letting you guide by the AvidsenHome app

Fixed green light

• The inverter is starting

Solution: Patient 2 minutes. If after 2 minutes the green light is still fixed, make sure that the solar panels are properly exposed to the sun.

Flashing green light

• This is the normal operation of the inverter. The inverter is powered by solar panels at its best MPPT point, is connected to WIFI and is connected to a 230V socket.
• The solar kit produces current in this configuration.