• From the main menu, press the bottom or top arrow to display the manual mode logo.

• Manual mode will represent one hand on the bottom right part of the thermostat.
• Manual mode will make it possible to operate as a conventional thermostat.

• The temperature of the thermostat is adjustable thanks to its setpoint value (SET)
• In order to increase the set temperature, please press the high arrow.
• To reduce the set temperature, please press the low arrow.

• The temperature probe of the thermostat displays the exact room temperature in the ROOM tab

Be careful, by hand handling the thermostat by hand, the temperature of the room can be greater and the values erroneous.

• If the set temperature is inferior to room temperature, the thermostat will not activate and will not put your heater into service.

• If the set temperature is higher than the room temperature, the thermostat will activate and put your heater.
• A symbolwill appear on the thermostat.

• You can calibrate the temperature of the temperature probe as well as the hysteresis. Please refer to the advanced rule tutorial.