• Period programming can be done from the thermostat or application
• It is possible to create 7 daily programs of 6 periods each.
• The setting will set the beginning of the period.

In our examples, we will define the 4 periods as

• From 7:00 to 12:00, the thermostat will be set to 17°C
• From 12:00 to 14:00, the thermostat will be set to 19°C
• From 14:00 to 18:00, the thermostat will be set to 17°C
• From 18:00 to 7:00, the thermostat will be set to 19°C

• In the case of a figure where the thermostat will not be connected, it will be necessary to manually set the time and date.
• In the case of a figure where the thermostat will be connected, the time and date will be set automatically.
• To set the date, press

• The indication d: will appear on the thermostat. The represents the day.
• Press the top arrow or bottom arrow to adjust the day
• Then pressto validate.

• The indication rn: will appear on the thermostat. The represents the month.
• Press the top arrow or bottom arrow to adjust the month.
• Then pressto validate.

• The year appears on the thermostat
• Press the top arrow or bottom arrow to adjust the year.
• Then pressto validate.

• The time appears on the thermostat
• Press the top arrow or bottom arrow to adjust the time.
• Then pressto validate.
• Press the top arrow or bottom arrow to adjust the minutes.
• Then pressto validate.
• Press onto leave the menu.

• To enter programming mode, press PRG once.
• In case of non-adjustment in this mode, the probe leaves its programming mode on its own.

• The number that will flash will match the day of the week selected for the program.
• Press the top arrow or bottom arrow to adjust the day.
• In our example, the number 7 will correspond to Sunday.
• Then pressto validate.

• The first step makes it possible to adjust the trigger period of period 1 of the selected day (Sunday)
• Press the top arrow or bottom arrow to adjust the time.
• Then pressto validate.

In our example

• Press the bottom arrow to adjust the clock and set there to 7:00 am

• The second step makes it possible to adjust the triggering temperature of the period 1 of the selected day (Sunday)
• Press the top arrow or bottom arrow to adjust the temperature
• Then pressto validate.

In our example

• Turn the center wheel to adjust the temperature and set there to 17°C

• You spend at that time at the 2nd period of day 7 (Sunday)
• Press the top arrow or bottom arrow to adjust the trigger period 2 of day 7 (Monday)
• Pressto validate the time
• Press the top arrow or bottom arrow to adjust the trigger temperature of period 2 of day 7 (Monday)
• Pressto validate the temperature
• Do the same for period 3 and period 4 of day 7

In our example

• Period 2 starts at 12:00 at 19°C
• Period 3 starts at 14:00 at 17°C
• Period 4 starts at 6:00 pm at 19°C
• Period 5 not used should be set at 11:58 pm at 19°C
• Period 6 not used should be set at 11:59 pm at 19°C

• Make the desired settings using the same method for the 4 periods of:
• day 1 (Monday)
• day 2 (Tuesday),
• day 3 (Wednesday),
• day 4 (Thursday)
• day 5 (Friday)
• day 6 (Saturday)

• Once the programming is completed, briefly pressto have the program number on the thermostat thermostat.
• This allows you to activate programming mode.

You can also create the programs from the application.

• Open the AvidsenHome app

• Select your thermostat

If your thermostat does not appear, please follow the tutorial "Wifi connection 127062 "

• Select "Weekly Programming"

• Choose the day corresponding to the desired program and choose the period to change.

• Adjust the start of your period as well as the desired temperature by dragging the selection roulette down
• Click on "backed" to validate the period.

• Do the same for all the desired periods and click on the top left arrow to return to the previous menu.

• Once the programming is done, you will need to enable the programmed mode.
• Click on "Mode" in the thermostat home page.
• More select "Auto" and validate by "Confirm".