• In order to enter advanced mode, please press the center button several times until turning off the probe

• Hold the central button for 5 seconds

• You will then be in the advanced setting menu #1
• To change the setting value, turn the central knob.
• To switch to advanced menu #2, press the center button once

01: Calibration of the temperature probe:Permetting the temperature displayed on the probe if this does not match the reality

02: Maximum set temperature:Allows you to limit the maximum set temperature

03: Minimum set temperature:Allows you to limit the minimum set temperature

05: Non-frost temperature:Allows you to adjust the temperature out of frost

09: Dead area:Avoids activating air conditioning and heating simultaneously. 0 = unlocked / 1= locked

10: Default display:Allows you to display the set temperature when the thermostat is on standby = 1 or room temperature = 0

11: Locking of keys:Allows you to lock thermostat buttons = 1 or unlock = 0

12: Automatic window detection.Enables window detection mode = 1 or disable = 0

13: Window opening detection time:Allows you to set the detection time when opening a window (in min)

14: Sensitivity of temperature drop window:Allows you to adjust the detection sensitivity when a window is open (in °C)

15: Cut-off time heating after window opening:Allows you to adjust the time (in min) when the heating will be cut following a window opening.

17: Reset:Allows you to reset thermostat adjustment = 1 and then press the center button for 5 seconds